Category Guide

Electronics & Smart Hardware Sourcing Guide: China

Most electronics enquiries are for one product, and for those a good factory direct is usually the shorter answer. Our work is different. It begins when the brief is a set of different finished devices that no single factory makes — several products from different categories that have to meet one specification, arrive together, and ship as one package. The job then is not designing the electronics. It is finding the right factory for each item, holding them to one written standard, and owning the handovers between them.

Multi-product programs One written specification Factory engineering, not ours

What This Page Does Not Cover

Be clear about the boundary first.

We are a buying office, not an engineering team. We do not design circuit boards, write firmware, develop software or run an ODM engineering programme. We do not answer engineering questions on a factory's behalf — the factory's engineers answer those, and we make sure their answer is written down and tied to a model and a production batch.

That boundary is not a weakness to hide. It is what keeps the rest of this page honest.

When Several Finished Items Ship As One

Here is the work we actually take on.

Several finished items, one standard, one shipment Different finished items from different specialist factories, held to one written standard, checked and packed as one delivery. Finished item 1Finished item 2Finished item 3Finished item 4 own specialist factoryown specialist factoryown specialist factoryown specialist factory ONE WRITTEN STANDARD one owner at every handover CHECKED AGAINST THE STANDARD packed and shipped as one delivery
Different finished items come from different specialist factories. A written standard and a named owner at each handover are what let them arrive as one package.
Two people reviewing a written sourcing brief at a table with a laptop
Photograph: a written brief reviewed around a table during a sourcing visit, with a laptop and papers. No client markings.

A buyer needs a set of different finished items — unrelated products from different categories, made by unrelated factories — packed together and sold as one set. No factory makes all of them. Each category has its own specialists, its own minimum, its own quality language and its own documents.

This is a supply-chain combination job. It is not product development, and the distinction matters.

The Existing-Product Route

Most electronics projects that actually reach production are not built from nothing. They start from an existing product line that already works, with a modification: a different plug, a different finish, a different label, a bundled accessory, a different case. That route is faster and more reliable than a ground-up build, and it is where a buying office can add real value.

Two questions decide whether the route is open

Certification: Three Questions About The Documents

Products with a radio — Bluetooth and Wi-Fi included — need an equipment approval before they can be sold in a given market. Which approval applies depends on the product and the destination — that is a question for the market and the factory's engineers, not a claim we make. We do not issue certificates. What we do is check the documents a factory gives us with three questions:

Testing goes to a licensed third-party laboratory. One point worth knowing early: a CE mark is the EU/UK route — it does not clear a product into the United States or Canada.

The Quotation, Line By Line

Two factories can only be compared when their quotations are built the same way. Five lines decide that:

LineWhy it decides the comparison
Unit price and quantity tiersSame quantity, or the comparison is fiction.
Plug or custom versionA different plug is a different product — and often a different certificate.
Tooling or mould costPaid once, quoted wildly differently, sometimes hidden inside the unit price.
Tax and invoiceExport price and domestic price are not the same number; the quotation must say which one it is.
Firmware / software buildThe build on the sample should be the build that ships. The version gets written down by the factory.

None of these lines makes us the engineer of the product. They make the comparison honest, which is a different thing.

Samples Checked Against One Written Standard

The factory makes the samples; we manage the rounds. Every sample is checked against the same written specification — dimensions, radio module, documented firmware version, packaging — and whatever is still open gets written down as open. When several factories are building parts of one set, three slightly different drawings are not a sampling problem. They are a specification problem, and they get fixed in the document, not on the production line. Technical questions that come up during sampling go to the factory's engineers, and their answers are recorded against the model.

Where the cluster sits. Shenzhen is the brain-and-modules end: boards, sensors, platform ecosystem, tightest iteration loops. The finished-device and lighting assembly sits in the cities next door, inside roughly a ninety-minute drive. That radius is why a written specification can actually be enforced across a whole programme in person — factory visits are measured in hours, not flight time. It also means the factories in a kit programme are usually reachable in the same trip.

What You Receive

What This Guide Does Not Claim

FAQ

Do you design electronics or write firmware?

No. We have no in-house engineering team. The factory's engineers answer technical questions; we make sure those answers are asked, recorded against the right model and production batch, and written into the specification. If your brief needs a product designed from a blank page, you need a design house or an ODM with its own engineers — we will say so early.

What electronics work do you actually take on?

The supply-chain side of a multi-item programme: several finished items from several factories, held to one written specification, with named ownership at each handover and one consolidated delivery. Single-product enquiries are usually better served by going to the factory direct.

I need an existing product modified, not invented. Is that your work?

Often, yes. We find the factory that already makes the product and confirm it has its own product line and can control the change. We then rebuild its quotation and hold the sample to one written standard. If the change needs engineering we do not have, we say so rather than promise it.

Do you issue CE, FCC or RoHS certificates?

No. We do not issue test or inspection certificates. Testing goes to a licensed third-party laboratory, and we check who issued each certificate, which model it covers and whether it covers the production batch.

Does a CE mark clear my product into the United States?

No. The US runs on FCC rules — an FCC ID for anything with a radio, an SDoC for wired-only products. Canada runs on ISED and CSA. CE is the EU/UK route.

Do you check where the radio module comes from?

Yes — module and component origin is part of supplier screening, because some sources can block equipment approval in a market. We record the answer in the specification. It is a screening question, not legal advice.

How do you compare two factories that quote in different styles?

We rebuild both quotations into the same five-line structure — unit price and tiers, plug or custom version, tooling, tax and invoice, firmware build as documented by the factory — and compare them at the same quantity under the same written specification.

Who makes the samples?

The factory makes them. We manage the rounds, hold every sample against the same written specification, and record the firmware version that ships with the sample.

What documents do we actually receive?

The original files as each factory issued them, a shortlist note per factory, a dated visit record with photographs, our own conclusion kept separately labelled, and the one written specification for the programme.

Start

Tell us the items, the destination market and the quantities. We will state the scope, which documents the destination market will require, and the fee — before any work starts.

Ask About A Sourcing Programme